1979 Honda CR250
$15,000
38 photos of this bike.
Price check
Details
| Year | 1979 |
|---|---|
| Model | CR250 |
| Series | Dirt/Off-Road |
| VIN | CR250RE-2101817 |
| Mileage | 100,000 miles |
| Colour (as listed by seller) | Red |
| Transmission | Not recorded |
| Seller | hooskie22 |
| Listed by | eBay |
| Location | Houston, Texas |
About this bike
For sale on eBay: a 1979 Honda CR250 (Dirt/Off-Road), Red, in Houston, Texas. This motorcycle was restored . Asking price $15,000 on eBay.
More about this bike
Listing details from the bike's own eBay listing: Year: 1979; Make: Honda; Model: CR250; Mileage: 100,000 miles; Engine: 250 cc; Type: Dirt/Off-Road; Color: Red. This motorcycle was restored . Not preserved with a mish-mash of stock and reproduced parts but restored . I would estimate it's 90% OEM. Title not available - Bill Of Sale Only Every effort and expense was taken to use only original Honda parts on this build. Every component was disassembled, inspected, rebuilt, restored or replaced to return it to “As Delivered” condition. Throughout the restoration, original factory Honda hardware was used in 100% of the applications. Attention was paid to which bolts/nut originally came Cadmium Plated (not all were) and were finished in Yellow Zink to mimic Cadmium. All the small rubber grommets, seals, frame protector, little gas-line clamps and any item that typically got tossed are present. The engine was completely rebuilt and painted the correct "Satin" Tahitian Red. Rod, Cylinder, Wiseco Piston, Bearings, Seals, Gaskets, Clutch The frame/swingarm/tank were blasted, inspected and painted in the correct "Gloss" Tahitian Red. The front fender, rear fender, side plates and front number plate are original and have been restored and painted in the same "Gloss" Tahitian Red as the tank and frame, so the match is perfect. The undersides received the "Matte Red just like the originals. The wheel restoration included Black Cerakoted Stock Hubs laced to stock rims with Buchanan Spoke Kits. Bearing and seals were replaced. Tubes, Rim Locks are off-the-shelf stuff Tires are IRC and have that Vintage Bridgestone M22 vibe. The swingarm received new bearings, seals and spacer as did both hubs The stock Showa shocks were rebuilt/restored using Ohlin Shock Internals. The original Honda front forks were completely disassembled and rebuilt. It does come with a restored OEM kickstand, new OEM spring and bolt List of non-OEM parts Cables Tires Tubes Rim Locks Brake Shoes Throttle Tube Spokes Handle Bars Seat Cover Frame # CR250R-2110635 Engine #-CR250RE-2101817 No title = Bill of Sale Only No interest in crating and/or shipping. Will assist with pickup only. I have no interest in putting gas in this example and start it. I have receipts and approx 50 photos of the complete engine build. Look at the attention to detail and accept that anyone willing to go to the length of this build isn't gonna skimp on the engine. It's likely a collection piece rather than something that would get ridden.
What the photos show
- Only two frames were available to view for this bike, so this note covers just those two.
- Red Honda motocrosser on a stand; side panel reads 250R CR Elsinore and the tank carries the Honda wing.
- All-red engine and plastics look freshly finished, with a black expansion-chamber exhaust.
- Wire-spoke wheels with deep knobbly tyres that look new; black seat looks unmarked.
- Twin rear shocks with black springs look clean in the close-up; no visible rust or damage in either frame.
- With only two frames, the other side, cockpit, underside and details cannot be judged at all.
- Photos cannot settle starting, running condition, gearbox, frame numbers or title status — verify before bidding.
Money: $15,000 is strong money for a 1979 CR250 and the two viewable photos show a very clean red Elsinore; demand the full gallery, a start video and number checks before bidding.
Comments
Loading comments…









































